Products|spray booth|spray booths|painting booths|spray rooms|painting rooms

Automotive Spray Booth

Car / Automotive Spray Booth:
Our spray booths for car can be delivered with the following features:

• With different fan capacity

• With diesel or gas burner, brand Riello or Weishaupt

• With underfloor suction or metal basement

• With full or partial gratings

• In over floor execution with metal socket and inside or outside ramps

• Position of generator could be on left side, right side, rearwards or top of the booth

• As combined painting & drying booth or with separate drying booth

Standard Models of Car Spray Booth:
TIMBO-702

Internal size 7000 × 4000 × 2800 mm (L×W× H)

Wall & Roof Panel use 50 mm Double Construction with Insulations Rock-Wool

58W OSRAM Lamps >1000 Lux

2 × 7.5 KW SIEMENS motors for air supply and exhaust

Air capacity of 25,000 m³/h, star-delta start

TIMBO-802

Internal size 8000 × 4000 × 3000 mm (L×W× H)

Wall & Roof Panel use 50 mm Double Construction with Insulations Rock-Wool

58W OSRAM Lamps >1000 Lux

2 × 11 KW SIEMENS motors for air supply and exhaust

Air capacity of 30,000 m³/h, star-delta start

Overview

Bus / Truck / Marine Spray Booth

Spray Booth for Bus / Truck / Marine:
Painting booth for Bus / Truck / Marine are individually produced for the respective requirement.
The plants may be equipped with one single group of aggregates or with several aggregate
sections.

A plant with long extension may be devided in different sections with following options:
• The sections can be operated singularly as spraying and drying booth.
• If using the total length of the plant, the sections can be connected to one booth.

For the air flow you may choose (as desired or as structural possibilities allow) between:
• Diagonal air ventilation
• Vertical air ventilation with ground suction or lateral suction

Overview

Industrial Spray Booth

Industrial Spray Booth:
Painting plants for industry are individually planned and produced in accordance with the needs and structural possibilities of our customers.

We consider your specific requirements with regard to:
• Preparation
• Process flow
• Transport systems, if required
• Available space conditions

Whatever small or large parts you want to paint, whatever steel girder or machine tool, we
can provide the adequate plant to you.

Overview

Prep Station

Preparation Area:
To carry out the preparation for painting of vehicles or vehicle parts or spot repair, we offer the equipment of preparation areas with an efficient air extraction.
As required, preparation areas may be equipped as follows:
• Overfloor execution with metal socket
• Underfloor execution with ground suction with full or partial gratings
• Suction via filter boxes
• With car lifter
• Space separation by manual curtain systems or electric roller shutters
• Aggregates separately for each preparation area or interconnected for several places
Preparation areas can be equipped with an recirculated air system only or alternatively with
air supply and exhaust system.

Overview

Paint Mixing Room

Paint Mixing Room:
For store and mixing of paint, we offer you a paint mixing room with lighting and big window in the entrance door.

Such as spray booths, the mixing rooms are made of double-wall panels of galvanised steel sheet
with an insulation of non-combustible rock wool.

Paint mixing rooms may be delivered in any extensions required.

Overview

Equipment &Accessories

The construction and function of Predo (TIMBO) painting plants meet the relevant German and European safety regulations for the processing of conventional and water-based paint systems.
1. Booth Shell
The double wall panels are made of steel sheet, thickness 50 mm, inside and outside white,
insulated with non-combustible rock wool. They have a tongue and groove interlocking system for
quick assembly.
2. Filter Ceiling
The filter ceiling is also made of fully insulated sandwich panels in white colour with filling of
mineral rock wool. The ceiling filter has a quick change system, so there is only one person
needed for exchange of filters.
3. Lighting
The ceiling lights consist of units with 4 × 58 W lamps with electronic ballast. The units are
mounted at 45 ° , protected with safety glass towards in-cabin room, and hermetically sealed,
according to IP 54, Zone 2. The side lights consist of 2 × 58 W lamps and are mounted vertically
in the side walls.
4. Aggregates
For the aggregates directly-driven radial ventilators are used with high efficiency. The motors are
from Siemens or ABB. Depending on requirements and structural possibilities the aggregates may
be positioned at one side or behind the booth as well as space-saving above the booth.
5. Heating System
For heating oil or gas burners can be used with indirect burning via heat exchanger, or also hot
water or steam registers. The optimum heating is provided by direct firing with gas surface burner
with an efficiency of ca. 100%.
6. Control System and Adjustment
Predo (TIMBO) spray booths are equipped with following components for adjustment of the unit:
- Change-over damper for automatic change-over of the system from painting phase to
evaporation and drying operation
- Exhaust air valve for regulation of the booth pressure, adjustable by servo-motor
- For evaporation of water-based paints the system is equipped with an intermediate drying
feature.
- Solvent pipe in galvanised execution with air-stop device for air flow adjustment during drying
process, with flap valve, driven by servo-motor.
- Temperature electronically controlled by temperature sensor
- Filter control by manometer with direct indication
7. Energy Saving Feature
To save energy, our booths may be equipped optionally with Vacon frequency converters with
sensorless vector control, integrated PLC functions and with an energy saving switch to hang up
the spray gun and to change to the energy saving level.

Overview